This one lasts for a long time… but finally a new bottom bracket is rising. This is only a “cheap” workaround for the next project upcoming. So there is no fancy ceramic blingbling. Maybe later =D Main reason for this are still the creaking sounds while pedaling, as well as the nasty adapter cups from BB30 […]

As of the upcoming bottom bracket change I also replace the crank gaskets. Reason for this is a damaged gasket on the right drive side. This “guide” is only for disassembly of the crank and replacing the gasket on the right side. The installation of the left side as the installation of the crank arm […]

Second Post… new Chain. As the last view changes its again the Dura Ace CN-HG901 with quick-link (master-link). These tools are needed: Bike Stand CC-3.2 CT-3.2 MLP-1.2 Rod/Stick Official Service Manual: http://si.shimano.com/pdfs/dm/DM-CN0001-06-ENG.pdf Service/Spare Part: Shimano Dura Ace 11s Chain CN-HG901 (Quick-Link) I-CNHG90111116Q No warranty in ANY case of damage! First of all is to check the […]

Today is Drivetrain-Day. First Post will be the replacement of the rear derailleur pulleys. This is just a simple task. The following post will be for a new chain. These tools are needed: MLP-1.2 3mm Allen key Torque Wrench Official Service Manuals: http://si.shimano.com/pdfs/dm/DM-RD0003-09-ENG.pdf http://si.shimano.com/pdfs/ev/EV-RD-6800-3608E.pdf Service/Spare Part: Shimano Pulley Set RD-6800 Part-No: Y5YC98140 No warranty in […]

Since the last few rides my BB started a creaking noise. As I know, often the sound is coming from the pedals but I serviced them already up so… BB-time =) This will only be a minor service of “cleaning” if its possible. I think I will change the BB anyway. All along I was […]

Same preceder every year… new cable-routing. This come along by bad braking and shifting quality, like a rasp in the leaver.  All caused by corrosion due the loss of  the cable sheathing combined with environmental influences – just normal. So here we go =) These tools are needed: Bike Stand CN-10 torque wrench 5mm Allen key 6mm Allen […]

From time to time it is useful to perform a minor pedal service. This time for the Ultegra 6800 (PD-6800). These tools are needed: Bike stand 17mm spanner Torque Wrench Grease Synthetic Oil Official Service Manual: http://si.shimano.com/pdfs/dm/DM-PD0002-07-ENG.pdf No warranty in ANY case of damage! This service is very simple. Just unscrew the pedal body from […]